600W watt Solar Grid Tie Inverter DC 10.8V-30V TO AC 110V/120V 92% Efficiecy

More Models are available

SUN-250G: B004TVEF8Y, Wind-250G: B008BDAQDY

Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC) : B007WQBK2C, Wind-300G (10.8V ~ 30VDC): B005N2OLZU

Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM

Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0

Wind-500G (10.8V ~ 30VDC): B005N2ST9E, Wind-500G (22V ~ 60VDC): B007X0OVGO

Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4

Sun-1000G-HI (10.8V ~ 30VDC): B007XAP0V4

Operation Procedures

1, Connect the Solar Panel DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 20W~250W.

2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket.

3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called “Island Protection”.