55W Poly-Crystalline Solar Panel

Poly-Crystalline Solar Modules
Solzar’s mono-crystalline solar modules are composed of solar cells with the average conversion efficiency above 14%, EVA sheet, solar glass and Tedlar (TPT) back sheet compounded from fluoric-plastic and dacron. The solar module adopts reliable welding technology and high-vacuum heating lamination process and is equipped with anticorrosion-treated aluminum alloy frame and watertight terminal box, in accordance with IEC61215 and the II grade standard electrically. These poly-crystalline solar modules are available in the following watt (W) rated sizes: 5W, 10W, 20W, 40W, 53W, 85W, 110W, 120W, 150W, 175W, and 185W.

Design the characteristics:
Even under low light condition, Solzar’s multicrystalline silicon solar cell, with a defended and reflected membrane and high transparent glass can generate power efficiency above 14%.

Firm frame reliably:
Only for 46mm thick extremely thin positive pole anticorrosion-treated aluminum frame Safety glass and protect back sheet can avoid damage and water; Pour into the terminal box that the silicon froze the glue Utilize EVA and TPT can prevent water entering effectively.

Powerfilm R-21 21w Rollable Solar Panel Charger

Powerfilm r-21 weight: 1.42 lbs operating voltage: 15.4 operating current: 1.35 rollded dimensions: 14.5 x 4 unrolled dimensions: 14.5 x 60.75 ultra light – ultra thin – easy to use powerfilm® integrated solar panels (thin film on plastic) are developed and manufactured with a proprietary roll process and they are truly rollable unlike other thin film technologies that are only somewhat flexible. Powerfilm solar panels are all monolithically integrated which eliminates the need for damage-prone manual connections of individual solar cells. Powerfilm is made of silicon, a natural resource in abundant supply. Powerfilm is cadmium free, unlike some other solar technologies, and performs well in diverse environments, including hot sun, and does not suffer from wasted over-voltage. Includes ra-2 (12v femail cigarette lighter adapter) ra-11 (15ft. Extension cord with o-ring battery terminal connectors)

Sunforce 50022 5-Watt Solar Battery Trickle Charger

The Sunforce 50022 5-Watt Solar Battery Trickle Charger gives you another reason to love the sun – it will help keep your vehicle’s battery charged anywhere, anytime. Just plug this helpful 5-watt trickle charger into your vehicle’s 12-volt lighter socket and position the panel to pick up the most daylight possible. Or, if you prefer, use the included battery clamps to connect it directly to the battery, so you can keep your lighter socket open for cell phone chargers or other accessories. Regardless of how you hook up the battery charger, you’ll never get caught off guard without the juice you need to start your car. The amorphous solar panel is completely weatherproof, charges in all daylight conditions and has an integrated blocking diode that protects against battery discharge at night. The 50022 is the ideal choice for automobiles, recreational vehicles (RV), tractors, boats, electric fences, telemetry and more. It has a maximum power output of 5 Watts and 350Mah. With a maximum temperature range of -40 to 176-degrees Fahrenheit, this unit measures 14 x 0.75 x 13 inches (WxHxD) and weighs 4 pounds.

Ensupra Grid Tie Inverter 500W, 1 Year Full Warranty, Power from Solar Panel, Wind Generator, Hydro or Storage Battery; 10.8VDC-28VDC to 110VAC;MPPT; Pure Sinewave;Island Protection

Ensupra grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY).When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Connect the Solar Panel or Wind Turbine s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. f you are using battery, 2x12V (24V) battery recommended. Also use charge controller to prevent from too much battery drain.Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 25A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 50W~600W. 2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The green LED indicators will glow when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The red LED will be on, the inverter will not put out power, this is called Island Protection.Please follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor.Electrical Specifications: Maximum AC Output Power: 500W AC Output Voltage Range: 120V ÂC±10% AC Output Frequency Range: 60±3Hz Total Harmonic Distortion(THD): <5% Power Factor: 0.96+ DC Input Voltage Range: 10.8-29VdcPeak Inverter Efficiency : 90% Standby Power consumption: <0.5W Output Current Waveform: Pure Sine-wave Over Current Protection: Yes Over Temperature Protection: Yes Reverse Polarity Protection: Yes Island Protection: Yes Stackable : Yes WARRANTY: 1 YEAR

Ensupra Grid Tie Inverter 500W,Adv.design,1 yr. Wrty,25-46VDC to 110VAC,1Yr.Wrnty,Power from Solar Panel, Wind Generator, Hydro or Storage Battery; MPPT; Pure Sinewave;Island Protection;1 Year Full Warranty

Ensupra grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY).When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Connect the Solar Panel or Wind Turbine DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. If you are using battery, 3x12V (36V) battery recommended. Also use charge controller to prevent from too much battery drain. Recommended DC input cable size for maximum output is 10AWG or cables that can handle more than 12A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 50W~550W. 2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The green LED indicators will glow when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The red LED will be on, the inverter will not put out power, this is called Island Protection.Please follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor.Electrical Specifications: Maximum AC Output Power: 500W AC Output Voltage Range: 120V ±10% AC Output Frequency Range: 60±3Hz Total Harmonic Distortion(THD): <5% Power Factor: 0.96+ DC Input Voltage Range: 24.8-46VdcPeak Inverter Efficiency : 90% Standby Power consumption: <0.5W Output Current Waveform: Pure Sine-wave Over Current Protection: Yes Over Temperature Protection: Yes Reverse Polarity Protection: Yes Island Protection: Yes Stackable : Yes WARRANTY: 1 YEAR

Instapark® NEW All Black 5W Mono-crystalline Solar Panel with 12V Solar Charge Controller

Tired of all the noise and smell from your diesel generator? The Instapark SPCC-5W offers you a quiet, clean while carbon-free alternative. Capable of converting virtually unlimited solar energy into clean, green, most importantly, free electricity, the Instapark SPCC-5W includes a 5-Watt mono-crystalline solar panel with solar charge controller.

This solar panel is made of high efficiency mono-crystalline solar cells embedded in transparent vinyl acetate behind tempered glass with heavy back sheet ensuring maintenance free performance. Unlike amorphous solar panels, which only last about 5-7 years of continuous use, mono-crystalline solar panels can still retain over 80% of efficiency even after 25 years of continuous use. Also, the mono-crystalline panels are much more efficient and thus smaller in size while producing higher wattage.

This kit is designed and engineered to primarily charge 12-Volt batteries, which store and provide usable power when needed, ideal for powering your RVs, ATV, marine boats and electronic equipments. The included solar charge controller helps prevent any connected batteries from overcharging. Other than recreational applications, solar power can also help lower your energy bills by reducing your dependence on the main electrical grid and provide back-up power during power outages.

Solartech SPM065P-N 65-Watt 12-Volt Polycrystalline PV Solar Panel

Now you can use clean, renewable energy with Solartech solar panels. These high quality solar panels can be used in single panel setups or multipanel systems. Actual dimensions are 21.3″x38.9″ and includes 3′ of power cable attached. These panels can be used for 12V battery charging or in conjunction with an inverter for 110AC power. You can wire them in parallel to maintain 12V charging or wire them in parallel for 24V and higher charging.